Factory-direct-hardware Hansgrohe 10458 Axor Starck Manual do Utilizador Página 2

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 24
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 1
2
Axor Starck Free-Standing Tub Filler
10458XX1
Technical Specification
Maximum water pressure 145 psi
Recommended water pressure 14.5 - 72 psi
Maximum hot water temp. 176
o
*
Recommended hot water temp 120
o
- 140
o
*
Max. flow rate @ 45 psi 5.8 gpm
Rough-in 10452181 must be installed and the floor finished and made watertight before the tub
filler can be installed.
This tub filler is not anti-scald. If anti-scald capability is desired, or is required by local plumbing
codes, install remote pressure balancing valve 13418181 to the hot and cold supplies before they
go into the 10452181 rough-in.
The handshower is protected against back siphonage with a check valve, located in the hand-
shower outlet on the tub filler. The check valve should be inspected and cleaned yearly.
Tub filler 10458XX1 is listed by Underwriters Laboratories.
*Please know and follow all applicable local plumbing codes when setting the temperature on the water heater
Vista de página 1
1 2 3 4 5 6 7 ... 23 24

Comentários a estes Manuais

Sem comentários