Factory-direct-hardware Hansgrohe 39116 Manual do Utilizador Página 1

Installation Instructions / WarrantyCitterio39115XX1

10Limited Lifetime Consumer WarrantyThis product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”).

11TO OBTAIN WARRANTY PARTS OR INFORMATIONContact your Hansgrohe retailer, or contact Technical Service at:Hansgrohe Inc.1492 Bluegrass Lakes ParkwayAl

Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004Tel. 770 360-9880 • Fax 770 360 9887www.hansgrohe-USA.comUS - Installation Instr

2Citterio Wall-Mount Lavatory Trim39115XX1Technical DataMaximum incoming water pressure 145 psiRecommended incoming pressure 14.5 - 72 p

3Installation InstructionsTurn off The waTer aT The supply before beginning The insTallaTion.· Remove the caps from the plaster shields. Cut the pla

4· Install the springs and cup washers in the valve body. Install the cartridge assembly.· Install the handle. Tighten the set screw using the enc

5If the distance is 3 1/4” – 3 7/8”, select the two “A” sleeves (1-1/4” long).If the distance is 3 7/8” – 4 3/8”, select the two “B” sleeves (7/8” lo

6· Measure the distance from the outside surface of the finished wall to the spout port (“X”). Add 2” to X· Measure the threaded end of the spout.

7· Use the service key to tighten the escutcheon retainers against the plate.· Lightly coat the threads on the flanges with the included lubricant.

8User InstructionsLift the handle to turn the faucet on. Pivot the handle to the left for warmer water, to the right for cooler water. Push the hand

9Cleaning Recommendation for Hansgrohe ProductsModern faucetry and shower products utilize a combination of materials to comply with the needs of the